Major performance
Printing color：6 color 
Machine speed：170 meters/per minute
Printing speed：120-150- meters/per minute
Printing material：film PE, PET, BOPP, Paper
Thickness of printing material： maximum 200 microns
Material width：500mm
Printing width：480mm
Printing length（repeat）：152.4~ 508mm (6"~20")
Unwind reel diameter： Φ600mm
Rewind reel diameter：Φ600mm
Thickness of the printing plate (cliche)：1.14mm
Tape： 0.55mm
Plate mounting:steel cylinder
Printing ink：alcohol-soluble/UV    ink
Pump for alcohol-soluble paints ：Pneumatic, 2-chamber, membrane - 6 pcs.
Paint supply system：Closed type doctor blade
Anilox (ceramics)：1000 lpi – 4 pcs., 600 lpi – 1 pcs ，500 lpi - 1 pc.,
Unwinding unit：For one set
Inflatable unwinding shaft (pneumatic)：Ø 76 mm - 1pcs. (+spare)
Winding unit：For one set
Winder shaft inflatable (pneumatic)：Ø 76 mm - 1 pcs. (+spare)
Register precision：Longitude ±0.10mm
Register mode：Motor-driven
Drive mode：Servo motor
Tension scope：3 ~ 50kg
Tension precision：±0.3kg 
Air supply    ：0.6mpa
Press power：Mechanic control
Trapping roller：Pneumatic control, max. power 150kg 
Inking distributing：deceleration motor (reduction ratio 1 : 50)
Drying model 1：Electric heating（hot air）
Drying power 1：24kw
Drying model 2：LED UV
Drying power 2：15kw
Printing power：2.6Kw×8
Air blower (large)：0.75kw×4
Rewind motor power：5.5kw servo motor
Machine power                    50kw(Actual power consumption 15-25Kw)
Image inspection：Image inspection system (Auto cycle)        B′ST  Germany
Deviation correction system：Auto hydraulic pressure                      China
Printing plate lifting system ： Auto hydraulic pressure                      China
PLC ：HPMONT
Touch screen  ：HPMONT
Conventional bearing ：  Japan
Power: 380Voltage 3 phase and50 hertz
Outline size：4.48m×2.75m×3.45m

Major configuration
The Controlling System
1.Control system with PLC sequence control
2.Touch screen interface to operate
3.Image inspection system; 20″pure flat monitor to display real time printing；real effect, printing quality can be easy controlled.    
4.The operator can preset printing numbers on the auto-counter and the machine will stop at the preset number. 
5.The machine will stop at non-feeding.
6.It is equipped with 2.6Kw servo motor
7.Automatic sectional independent tension control

Unwind and rewind
1.Machine should have one unwind and one rewind
2.Material holder use air shaft  
3.Unwind with auto deviation correction system
4.Rewind by 5.5Kw servo motor
5.Unwind by Mitsubishi Magnetic Powder Brake
6.Rewind Tension Control System by PLC
7.Unwind Tension Control System by TC818
8.Roll assisted rewinding
9.Install tool drawer to store common tools

Printing
1.Electronic line-shaft drive
2.Servo motor independent drive 
3.Stainless steel ink pan
4.360 degree registering for longitudinal by motorized control.
5.Low speed and full load startup; stable running by tension control when increasing and decreasing speed; noise is decreased 
6.Aluminum roller adopts the Japan semi-sealing small bearing; flinty oxidation, static and dynamic balancing treatments are conducted; low resistance and small flop.
7.The special made modulus angular gears adopted; accurate printing size and full printing specifications (3.175mm is a spec)
8.The grouped and controlled bottom roller processed with Germany particular steel materials processed with special techniques and electrically gilded with 0.1mm hard chromium protective layers
9.Use alcohol-soluble for printing or UV ink.
10.Good Fire protection system
11.The machine use hydraulic printing-roll loading system which can automatically load printing rolls and run inks after the machine alarm working signal.
12.The operation is easier and more convenient，the register is more accurate，and the lifespan is also longer
13.High dots presentation rate under high speed; clear and vivid stratification of screen printing; strong stereo effect and accurate registering.
14.Chamber doctor blade system with ink container and circulating pump 
15.EDGE position control 
16.Able to print 4 colors pictures CMYK.
17.Good quality printing
18.Brilliance color appearance.
19.Wide envelopment
20.Static electricity removal system.
21.With work aisle
22.Blade clamping rubber profiles:60m
23.Doctor blade:60m
24.PE-foam seal:60pcs
25.3 set of printing cylinder, diameter size:50mm/100mm/150mm

The company adheres to the inter national first-class European and American technology and positions itself in high-end products . Our main product series include: Full Automatic Flexo Printer Slotter Die Cutter Folder Glue r/Stitch er Inline, Automatic High definition Printer Slotter Die Cutter(Servo drive), Automatic Printer Slotter Die Cutter(Gear drive), and other converting equipment. Professional focus is the guarantee of quality products of Matian company.

Overseas machine implementation fee is provided by the Purchaser that includes visa application fee, return air tickets, 3 meals, hotel accommodation and local transportation. The Purchaser shall ensure the total number of days for the implementation and shall be determined by discussion with the Vendor in advance. 1 technicians required.